# Done by Sunday > Done by Sunday turns practical home improvements into bounded weekend projects with preparation, safety, and cleanup built into the plan. Done by Sunday publishes original, long-form guides about weekend projects & practical DIY. Every article opens with a concise direct answer, is structured with clear headings and FAQs, and reflects mainstream expert consensus. ## Surface Refreshes - [Paint Brush vs Foam Roller for Furniture](https://dntabi.com/brush-vs-foam-roller-furniture/): Use a brush for furniture with corners, mouldings, spindles, narrow rails and hardware recesses. - [Clean and Degrease Furniture for a New Finish](https://dntabi.com/degrease-furniture-for-new-finish/): Clean furniture before painting by identifying its substrate and existing finish, then checking the exact cleaner, primer and paint instructions for… - [How to Fill Small Holes Before Painting](https://dntabi.com/fill-holes-before-painting/): Fill nail holes before painting only after confirming they are cosmetic, stable and not needed for hardware, ventilation, wiring or a furniture restraint. - [How Long Should Paint Dry Between Coats?](https://dntabi.com/paint-dry-between-coats/): Paint should dry between coats for the interval and conditions stated on the current label or technical data sheet for that exact product. - [How to Paint Laminate Furniture Without Guessing](https://dntabi.com/paint-laminate-furniture/): To paint laminate furniture, confirm the surface and condition first. - [How to Paint a Picture Frame and Reassemble It](https://dntabi.com/paint-picture-frame/): Paint a picture frame only after safely removing and separately protecting the artwork, glazing, mat and backing. - [How to Paint a Plant Stand for Its Actual Setting](https://dntabi.com/paint-plant-stand/): To paint a plant stand, identify its material, confirm that every load-bearing joint is sound and define whether it will be indoors, under cover or… - [How to Paint a Small Side Table Without Making a Mess](https://dntabi.com/paint-small-side-table/): To paint a small side table, first identify its material and repair any instability or moisture problem. - [How to Paint a Wooden Stool on Every Side](https://dntabi.com/paint-wooden-stool/): Paint a wooden stool only after confirming it is stable, structurally sound and not recalled. - [How to Paint a Wooden Tray Cleanly](https://dntabi.com/paint-wooden-tray/): To paint a wooden tray, first decide whether it is decorative, carries dishes or will touch unpackaged food. - [Water-Based Polyurethane vs Wax for Furniture](https://dntabi.com/polyurethane-vs-wax-furniture/): Choose a documented water-based polyurethane topcoat for furniture that needs a cured film for regular handling, wiping or tabletop use. - [How to Protect Floors While Painting Furniture](https://dntabi.com/protect-floors-while-painting/): Protect floors while painting furniture by identifying the floor and finish, then choosing a cover whose current instructions approve that surface,… - [How to Sand Furniture Before Painting](https://dntabi.com/sand-furniture-before-painting/): Sand furniture before painting only after identifying the substrate, existing finish and exact coating system. - [How to Tape Clean Paint Edges](https://dntabi.com/tape-clean-paint-edges/): To tape clean paint edges, identify the protected surface and select a tape whose current instructions cover that finish, coating and setting. ## Project Planning - [How to Plan the Cleanup for a DIY Project](https://dntabi.com/clean-up-diy-project/): Clean up after a DIY project by planning the end of each task before work begins. - [How to Create and Check a DIY Cut List](https://dntabi.com/create-diy-cut-list/): Create a DIY cut list by giving every finished part an ID, count, final dimensions, material, actual thickness, face and orientation, all traced to the… - [How to Estimate Materials for a Small DIY Project](https://dntabi.com/estimate-diy-project-materials/): Estimate DIY materials by measuring each finished part or surface, calculating net area, length, volume or count, and laying cut pieces onto the actual… - [How to Organize Tools for One Weekend Project](https://dntabi.com/organize-tools-for-project/): Organize tools for a project by listing the work in task order, then staging the exact tool, current manual, compatible accessory, guard, support,… - [How to Plan a Weekend DIY Project That Actually Ends](https://dntabi.com/plan-weekend-diy-project/): Plan a weekend DIY project by defining one specific finish line, inspecting the object or area, and dividing the job into preparation, application or… - [How to Make a DIY Project Plan That Holds Together](https://dntabi.com/scope-diy-work-before-starting/): Make a DIY project plan by defining one checkable finished result, then listing included and excluded work, existing conditions, dependencies, task order,… ## Full text for LLMs - [llms-full.txt](https://dntabi.com/llms-full.txt): every article as plain markdown in one file - Each article is also available as markdown at https://dntabi.com/.md ## Site - [About](https://dntabi.com/about/): editorial approach and standards - [All articles](https://dntabi.com/all/) - [Contact](https://dntabi.com/contact/)