All articles
Everything on Done by Sunday, organised by topic.
Surface Refreshes
- Paint Brush vs Foam Roller for Furniture — Use a brush for furniture with corners, mouldings, spindles, narrow rails and hardware recesses.
- Clean and Degrease Furniture for a New Finish — Clean furniture before painting by identifying its substrate and existing finish, then checking the exact cleaner, primer and paint instructions for…
- How to Fill Small Holes Before Painting — Fill nail holes before painting only after confirming they are cosmetic, stable and not needed for hardware, ventilation, wiring or a furniture restraint.
- How Long Should Paint Dry Between Coats? — Paint should dry between coats for the interval and conditions stated on the current label or technical data sheet for that exact product.
- How to Paint Laminate Furniture Without Guessing — To paint laminate furniture, confirm the surface and condition first.
- How to Paint a Picture Frame and Reassemble It — Paint a picture frame only after safely removing and separately protecting the artwork, glazing, mat and backing.
- How to Paint a Plant Stand for Its Actual Setting — To paint a plant stand, identify its material, confirm that every load-bearing joint is sound and define whether it will be indoors, under cover or…
- How to Paint a Small Side Table Without Making a Mess — To paint a small side table, first identify its material and repair any instability or moisture problem.
- How to Paint a Wooden Stool on Every Side — Paint a wooden stool only after confirming it is stable, structurally sound and not recalled.
- How to Paint a Wooden Tray Cleanly — To paint a wooden tray, first decide whether it is decorative, carries dishes or will touch unpackaged food.
- Water-Based Polyurethane vs Wax for Furniture — Choose a documented water-based polyurethane topcoat for furniture that needs a cured film for regular handling, wiping or tabletop use.
- How to Protect Floors While Painting Furniture — Protect floors while painting furniture by identifying the floor and finish, then choosing a cover whose current instructions approve that surface,…
- How to Sand Furniture Before Painting — Sand furniture before painting only after identifying the substrate, existing finish and exact coating system.
- How to Tape Clean Paint Edges — To tape clean paint edges, identify the protected surface and select a tape whose current instructions cover that finish, coating and setting.
Project Planning
- How to Plan the Cleanup for a DIY Project — Clean up after a DIY project by planning the end of each task before work begins.
- How to Create and Check a DIY Cut List — Create a DIY cut list by giving every finished part an ID, count, final dimensions, material, actual thickness, face and orientation, all traced to the…
- How to Estimate Materials for a Small DIY Project — Estimate DIY materials by measuring each finished part or surface, calculating net area, length, volume or count, and laying cut pieces onto the actual…
- How to Organize Tools for One Weekend Project — Organize tools for a project by listing the work in task order, then staging the exact tool, current manual, compatible accessory, guard, support,…
- How to Plan a Weekend DIY Project That Actually Ends — Plan a weekend DIY project by defining one specific finish line, inspecting the object or area, and dividing the job into preparation, application or…
- How to Make a DIY Project Plan That Holds Together — Make a DIY project plan by defining one checkable finished result, then listing included and excluded work, existing conditions, dependencies, task order,…